SPRINGBAK® SPRINGSOLES — VOLLEYBALL SHOE INSTALL VIDEO
Transcript · Runtime 0:20 · springbak.app/insoles/volleyball

This video has no spoken dialogue. The transcript below describes each
on-screen step with timestamps.

SCENE 1 — REMOVE AND INSERT

0:00  This example shoe has a removable factory liner. First try the
      Springsole without trimming it. A white court shoe sits on the gym
      sideline bench, laces open, the
      grey factory insole lifted out and set beside it — next to a black
      Springbak Springsole with the yellow Springbak script and logo.

0:03  Hands slide the black Springbak Springsole into the shoe, flat
      against the midsole, printed side up, lining the heel of the
      insole up with the heel of the shoe.

0:06  Thumbs press the Springsole smooth from heel to toe so it lies
      flat — no bubble, no wrinkle, no curled edge.

SCENE 2 — LAYER YOUR OWN INSOLE BACK ON TOP

0:10  The grey factory insole is lowered back into the shoe so it sits
      directly on top of the black Springbak Springsole.

0:14  Fingers press the factory insole flat from heel to toe. Trim only
      when necessary for a clean, flat fit. If needed, remove a very small
      amount from the toe or forefoot, reinsert it and check before cutting more.

0:17  The finished stack: black Springbak Springsole on the bottom, your
      own insole on top, and the shoe laced up snug.

The video shows a removable liner. If a lightly glued liner releases cleanly
with a gentle, steady pull, put the Springsole underneath it. Stop if the liner
starts to tear, damage, stretch or deform; leave it in place and put the
Springsole on top. Never force out a firmly bonded or stitched liner. Never
trim the heel, unnecessarily narrow the sides or alter the heel shape. The
Springsole must lie completely flat without curling, buckling, bunching or
pressure against the front of the shoe.

---
Springbak® Springsoles — U.S. Patents 5,554,694 · 5,695,850 · 6,120,880 · 6,589,630 B1
Made in the USA · $29.95 · springbak.app